AED98.50
Magnetic Stand for Dial Indicator
Featured categories
AED98.50
Magnetic Stand for Dial Indicator
AED125.80
Milimeter and Inch Digital Caliper 30 cm
AED88.50
Milimeter and Inch Digital Caliper 15 cm
AED68.50
Milimeter and Inch Digital Caliper 15 cm
AED1,250.00
This kit include 4 steepr moto 2.2 nm , 4 drive and power supply
Its directly connect to laptop
Mach3 compatible
test software include
AED210.00
Drill bit set 19 pcs
● Capacity 1mm - 10 mm with 0.5 mm step
● With metal box
Professional Drill bit grinder
● Professional drill bit grinder
● Grinding is accurate and quick , no skills required
Professional Tapping Machine
● Capacity M3 - M16
● DC motor 600 watt
AED365.00
Vacuum pump TC99
● Oil less
● Low noise
● Twin cylinder
● Over heat protection
This is high quality vacuum pump with inside heat switch ( when vacuum pump will be over heat ) it turn off the pump for prevent of...
FEATURE:
● Hardened and ground bedway . ● Large bore ( 38 mm ) spindle supported on taper roller bearing . ● T - slotted cross side . ● Enclosed gearbox enables large feed and threading . ● Right & Left hand...
FEATURE:
● Hardened and ground bedway . ● Large bore ( 38 mm ) spindle supported on taper roller bearing . ● T - slotted cross side . ● Enclosed gearbox enables large feed and threading . ● Right & Left hand...
FEATURE:
● Semi automatic mini lathe ( no need change gears manually .● Digital gear box adjustment for screw thread .● Metal gears , 1.1 KW Motor Power , 125 mm 3 Jaw Chuck.● V-way bed is hardened and...
FEATURE:
● Mini lathe cnc in two size .● High quality ball screw .● Motor power 750 watt .● Protection guard .● Best support for parts and service .● Primary train for start the machine ( Pay attention Machine need...
FEATURE:
● Variable speed ● Spindle is supported by precision taper roller bearing.● Power longitudinal feed allows threading.● Metal gears , motor power 1.5 KW for Lathe and 1.5 KW for mill● Tailstock can be offset...
AED525.00
FEATURE:
● The naccassery tools for wood working to make wooden bowl , plate or any wooden dish .
● 6 set chisel
AED325.00
FEATURE:
● The naccassery tools for wood working to make wooden bowl , plate or any wooden dish .
● 6 set chisel
AED585.00
FEATURE:
● The naccassery tools for wood working to make wooden bowl , plate or any wooden dish .
● 5 set chisel with cermet ( changeable ) .
AED2,560.00
FEATURE:
3 in 1 combination machine
Roll , Brake and Shear
Mini Factory
AED525.00
FEATURE:
Max belt thickness 5 mm
Max belt length 24 mm
Fix on bench work
AED860.00
FEATURE:
Max thickness 0.8 mm
Max length 305 mm
Fix on bench work
AED985.00
Wet sharpener RAS 150 G
Wet sharpening
Low speed
Polishing and grinding wheel
This wet sharpener model RAS 150 is suitable for sharpening all kind of wood working chisels and any tools need sharpening such as knife...
AED3,850.00
FEATURE:
Mill PLB 12V with 550 watt brushless motor
Variable Speed
Cast iron construction
Coarse feed for drilling, fine for milling
Column tilts up to 45° for angled machining
Two electronically variable control...
FEATURE:
Mill PLB 14 with digital read out speed , with 550 watt brushless motor
Variable Speed
Cast iron construction
Coarse feed for drilling, fine for milling
Column tilts up to 45° for angled machining
Two...
AED9,850.00
FEATURE:
● Variable speed ● Spindle is supported by precision taper roller bearing.● Power longitudinal feed allows threading.● Metal gears , brushless motor 750 watt for Lathe and 250 watt for mill● Tailstock can be...
